Tag: ESP32

Robotics Arm Controller using PS3 Wireless Remote

This project enables the user to control an RC servo-based robotics arm wirelessly. The board is based on ESP32-WROOM 32E Bluetooth/Wi-Fi module, thus PS3 or PS4 wireless remote can be paired. The project is built using ESP32 chip with Bluetooth and Wi-Fi connectivity, 4...

Continue Reading

Bluetooth Robot Car Controller using ESP32

This wireless robot car controller board is built using an ESP32 BT/Wi-Fi module, 2 x H-Bridges, 3.3V regulator. It also includes an ESP32 programming connector, power LED, screw terminal connector for the power supply, header connector for motors, and high-value capacitors on the DC...

Continue Reading

8 Channel ESP32 Remote Control

This is an 8-channel remote in a compact board suitable for remote ON/OFF applications using Bluetooth or Wi-Fi protocol. The board consists of an ESP32 module and 8 tactile switches connected to various GPIO. The circuit works with 3.3VDC power supply and a Li-Ion battery can be used...

Continue Reading

Single Channel PS3 Wireless Remote ON/OFF Switch

The board presented here is multipurpose hardware which includes the ESP32-Wroom module, 3.3V regulator, 5V relay, Power LED, Relay LED, and connector to program the ESP-32 Module. The project requires 5VDC and consumes 60mA current when the relay is ON. The project can be used in IoT...

Continue Reading

LilyGO TTGO T5-4.7 E-Paper Weather Station

The LILYGO T5 4.7 inch E-Paper ESP32 Development Board is an exciting 4.7" e-paper display integrated with an ESP32 WiFi/Bluetooth module. The board's processor is ESP32-WROVER-E with 16MB of FLASH memory and 8MB of PSRAM. The ESP32 module supports Wi-Fi 802.11 b/g/n and Bluetooth...

Continue Reading