login
7 Segment LED Based SPI Display using 74HC595
- Rajkumar Sharma
- 30.551 Views
- moderate
- Tested
- SKU: EL51562
- Quote Now
- 0 Likes
Single Digit Big Display module using 74HC595 IC project will display large size 7 segment single digit number. 3.5inch height, which can be visible over large distance. More digit can be connected serially to each other easily trough connector.
This circuit is a single digit seven segment big display using a set of 5 LEDs per segment and a shift register for easy control by micro-controller input. Each of the LEDs used in this project are 5mm high glow type.
Specifications
- A ULN2003 IC helps sink higher current flowing through the LEDs to grounds.
- Resistor R1 to R8 are current limiting Resistors for the LEDs connected in series.
- CN1 Connector is Data In connector
- CN2 Connector is optional Data Out Connector if you need to stack more than 1 single display board in series
- +V CN1 & CN2 should be connected to higher voltage to drive the LEDs
- VCC Should be connected to 5V DC. This supply can be source from host controller
- Each Segment made up of 5LEDs
- Series Current limiting resistor provide on each segment
- Series latched type display using SPI protocol
- Separate Header Connecter for connection input/output
- Four Mounting holes 3.2MM each
- PCB Dimension’s 125MM X 58MM
Schematic 
Parts List
Please follow and like us:
PCB
Please specify the uses of the 7 Segment LED Based SPI Display using 74HC595
This display can be used anywhere a big display is needed. This kind of display can be seen from several meters away. Example applications are digital clocks, thermometers, electronic games etc
Hello, Found your website very helpful. I request you to write an article on “Multiplexed display”, using single 74HC595, which will be very helpful to all. Ideally it would also help in learning about driving the segments with external transistors for digit selection.
Thanks for your kind comment! We will take your comment in consideration for a future article.
do you have a code for arduino?
We are sorry, no code is available at this moment, but shouldn’t be hard to make it work. You can also refer to datasheet for more information.
Can we use transistors instead of ULN2003A ?
basically ULN2003 is transistor array only