Bargraph Voltmeter 0-5V DC range – PIC16F686

Rajkumar Sharma
18.045 Views
moderate
Tested
SKU: EL49483
Quote Now
0 Likes

Tiny Bar-Graph displays provide a Red color bright, easy to read display of Voltage range of 0 to 5V. This Bar-Graph has 20 segments in single color and display 0 to 5V DC. The Barograph Voltage monitor is based on PIC microcontroller with 10 Bit resolution ADC. This high performance measurement provides unique capabilities and can be used in various applications. The Bar can display 0 to 5V with 20 LED with 0.25V (Approx.) resolutions. Each LED output provided with Solder- jumper for output set point can be configured for control, alarm, Relay.

Features

Supply 7.5 V to 18V DC (Direct 5V Input Possible)
Test Voltage Input 0 to 5V
Output Display 20 Color RED SMD LEDs
Compact Board with SMD Components
Supply input Header Connecter
On Board 5V Regulator
Resolution 0.25V Approx.
Onboard Trimport to Calibrate The Display Range.
Solder Jumper on each LED for Output Control, Alarm, and Relay
PCB Dimensions 75.88 X 26.69 MM

Calibration: Apply 7V to 18V DC supply, Apply accurate 5V at Input pin, Turn PR1 Trimport CCW/CW so all LED glow.

Schematic

Parts List

Connections

Jumpers

Photos

Video

Please follow and like us:

PCB

Downloads

9 Comments

Inline Feedbacks

View all comments

Charlie

6 years ago

I’m looking for something similar to measure 0-12vdc. The form factor must be approximately 2.5x1cm

mixos

Author

Reply to Charlie

6 years ago

Your form factor is too small to fit the required components. Otherwise you can measure 12V with this board by modifying the input voltage divider.

kamran

6 years ago

I’m looking for something similar to measure 4-20 mA and 0-20mA

Thank you

mixos

Author

Reply to kamran

6 years ago

You will need an intermediate circuit to convert current to voltage and then use that voltage to drive the LED bar-graph. A suitable converter would be: https://www.maximintegrated.com/en/app-notes/index.mvp/id/823