New Incremental Encoder Supports Smaller Shaft Sizes from 1 to 6.35 mm
MotorParts

New Incremental Encoder Supports Smaller Shaft Sizes from 1 to 6.35 mm

CUI Devices’ Motion and Control Group today announced the introduction of a new model to its AMT incremental encoder family that supports smaller motor shaft sizes from 1 mm to 6.35 mm (1/4 inch). The AMT12 series, based on CUI Devices' proprietary capacitive ASIC technology, brings...

Continue Reading
1.075
Views
0 Comments
Monolithic Power Systems (MPS) MP6651 Single-Phase BLDC Drivers
Motor

Monolithic Power Systems (MPS) MP6651 Single-Phase BLDC Drivers

Monolithic Power Systems (MPS) MP6651 Single-Phase BLDC Drivers are highly advanced and versatile single-phase brushless DC (BLDC) motor drivers. The Monolithic Power Systems (MPS) MP6651 has integrated power MOSFETs and a Hall-effect sensor to deliver maximum performance and...

Continue Reading
1.131
Views
0 Comments
DRV8317 3-Phase PWM Motor Driver
IC

DRV8317 3-Phase PWM Motor Driver

Texas Instruments' integrated MOSFET driver is suitable for driving 3-phase motors Texas Instruments' DRV8317 3-phase PWM motor driver provides three integrated MOSFET half-bridges for driving 3-phase brushless DC (BLDC) motors with 5 V, 9 V, 12 V, or 18 V DC rails or 2s to 4s...

Continue Reading
1.149
Views
0 Comments
High-performance, High-reliability Bipolar Stepper Motor Driver
Motor

High-performance, High-reliability Bipolar Stepper Motor Driver

The project presented here is a bipolar stepper motor driver. It is based on BD63731EFV chip which is a low-consumption driver that is driven by a PWM signal. The power supply voltage of the project is 8 to 28V DC, and the rated output current is 3A. CLK-IN driving mode is adopted for...

Continue Reading
1.131
Views
0 Comments
MP6612 – 45V, 5A, H-Bridge DC Motor Driver with Current Sense and IN1/IN2 Logic Inputs
ICMotor

MP6612 – 45V, 5A, H-Bridge DC Motor Driver with Current Sense and IN1/IN2 Logic Inputs

The MP6612 from Monolithic Power Systems is a Half-Bridge DC Motor Driver that is used for driving reversible motors. It requires an input voltage of 4-45 V for operation and has an output current of up to 5 A. The motor driver consists of four N-channel power MOSFETs and an internal...

Continue Reading
1.309
Views
0 Comments
Texas Instruments DRV8251 4.1A Brushed DC Motor Driver
IC

Texas Instruments DRV8251 4.1A Brushed DC Motor Driver

Texas Instruments DRV8251 4.1A Brushed DC Motor Driver is an integrated motor driver with N-channel H-bridge, charge pump, current regulation, and protection circuitry. The charge pump improves efficiency by supporting N-channel MOSFET half-bridges and 100% duty cycle driving. The...

Continue Reading
1.274
Views
0 Comments
Nidec Develops the World’s Thinnest-class Linear Vibration Motor
Motor

Nidec Develops the World’s Thinnest-class Linear Vibration Motor

Nidec Corporation announced today that it has developed the world’s thinnest-class linear vibration motor (the “Slider”). A number of commercially available smartphones and smartwatches are equipped with a vibration motor nowadays. Though, in the past, an eccentric motor was used...

Continue Reading
1.139
Views
0 Comments
Nidec Develops Linear Vibration Motors with Smallest-class Diameters in the World
Motor

Nidec Develops Linear Vibration Motors with Smallest-class Diameters in the World

Nidec Corporation announced that it has developed a series of linear vibration motors with smallest-class diameters in the world (the “CA series”). A number of commercially available smartphones and smartwatches equipped with a vibration motor nowadays. Though, in the past, its...

Continue Reading
1.157
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives